Hyundai SUPER-286c computer revision c

Seek advice, give advice or tell others about your repair and restoration projects

Hyundai SUPER-286c computer revision c

Postby vintageatk on Mon Jul 17, 2017 7:37 pm

Hello

I got Hyundai SUPER-286c computer revision c model.
https://www.youtube.com/watch?v=yvgRMq2MqkY
http://www.1000bit.it/ad/bro/hyundai/Hy ... r-286c.pdf
https://www.recycledgoods.com/canon-md5 ... ppy-drive/
This machines has ISA paradise 8 bit graphics card,one Canon MD5501 1.2 MB 5.25" Internal Floppy Drive and Hard Drive: SEAGATE ST1144A 130MB 3.5"/HH IDE / AT and this controller (picture taked from ebay).Later i take more pictures.
Problem is how to mount 1.44 floppy drive this machine ?
If mount motherboard 1.44 floppy drive burn.It works about 2 minutes then smoke smell and thats it.
Cables is connect right,but this is mystery why ?

Does somebody know this machine how to set up "things"
And where is orginal manual pdf format if it is existence ?

Help needed.
Thanks.
Attachments
s-l1600.jpg
s-l1600.jpg (137.47 KiB) Viewed 44 times
vintageatk
 
Posts: 17
Joined: Sat Jul 09, 2016 6:44 pm

Re: Hyundai SUPER-286c computer revision c

Postby LS120 on Wed Jul 19, 2017 5:28 pm

is that a mfm/rll card and not a fdd and ide card??? it would say alot about the smoking or is the cable the right way around.. there were 5.25 to 3.5 adapters around. or get a dual 3,5 & 5.25 cable
LS120
 
Posts: 79
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Hyundai SUPER-286c computer revision c

Postby vintageatk on Thu Jul 20, 2017 5:53 am

Its works. :D
My direct connect electric was "little problem",but now both drives working.
If try via ide controller card both floppy drives work same time.
So ide controller is not problem now,but that machine manual is.
HDD works that ide controller very good.

Thanks advice LS120
vintageatk
 
Posts: 17
Joined: Sat Jul 09, 2016 6:44 pm


Return to Repair and Restoration

Who is online

Users browsing this forum: No registered users and 3 guests