Compaq Portable III hard drive repair

Seek advice, give advice or tell others about your repair and restoration projects

Compaq Portable III hard drive repair

Postby glc on Sun Jul 31, 2016 11:23 pm

This compaq was tested a few years ago and the RTC battery was replaced.
I tested it a few weeks ago and the the compaq setup program saw the Type 2 HDD there but it wouldn't boot.
I could hear it spin up so it wasn't 'stiction'.
A dos floppy running fdisk didn't know it was there
There was just the flashing curser Image
so I pull the HDD apart and my suspicions are aroused where the head arm is positioned when the HDD is running
http://s1379.photobucket.com/user/glc/media/IMAG0324_zpscveazheb.jpg.html
by moving the arm with a long thin object toward the edge of the disk, all of a sudden it comes up with the message 'Starting MS-DOS'.
Hooray..
Here's where the arm should be...
http://s1379.photobucket.com/user/glc/media/IMAG0323_zpsn5yzfowp.jpg.html
On closer inspection I notice a thin object that is underneath the actuator arm mechanism and I pull it out
http://s1379.photobucket.com/user/glc/media/IMAG0325_zpshq4ujvsg.jpg.html
Now it boots successfully with the HDD still in pieces
http://s1379.photobucket.com/user/glc/media/IMAG0326_zps7zdyxg8g.jpg.html
the foreign object inside the arm mechanism was a wafer of paint that had flaked off inside the housing
thats all it takes for your HDD to not work
Here is the compaq back together again, pity I can't easily fix the line on the screen
http://s1379.photobucket.com/user/glc/media/IMAG0328_zpsgfjq9krq.jpg.html

Now I have a couple of SLT/286's that have HDD problems as well, I'll get to these next I hope


have any of you have had any similar weird fixes for hard drives,?

thanks

Grant
glc
 
Posts: 35
Joined: Tue Nov 25, 2014 5:00 am

Return to Repair and Restoration

Who is online

Users browsing this forum: No registered users and 26 guests

cron