Has anyone attempted to build an Apple 1 work-alike?

Anything to do with New Zealand Classic or Vintage Computing not covered in the other forums

Has anyone attempted to build an Apple 1 work-alike?

Postby TRS80 on Sun Oct 21, 2012 1:20 pm

I say work-alike because the one I am considering (the A-One design from Achatz Electronics) is not really a clone as it uses modern parts. No longer available as a kit but all the firmware and documentation is available at http://www.achatz.nl/catalog/links.php. The parts are readily available. Sure I could use an emulator but melting solder is good.

A real clone such as a Mimeo 1 (http://www.willegal.net/appleii/apple1-kit.htm)would be neat but just too expensive and hard to find the parts these days.
Wanted: S-100 Bus components - please PM me if you have any. They don't even need to work!

SBC6120 / PDP11 + VAX / TRS-80 / Kaypro / Northstar / Home Brew Z80 / BBC / Amstrad / Commodore
http://www.quicktrip.co.nz/jaqblog
TRS80
 
Posts: 76
Joined: Wed Aug 13, 2008 6:43 pm
Location: Auckland

Re: Has anyone attempted to build an Apple 1 work-alike?

Postby mrad01 on Sun Oct 21, 2012 1:34 pm

It's on my list.... seriously keen to give the Mimeo a go...
mrad01
 
Posts: 289
Joined: Sun Sep 16, 2012 6:13 pm

Re: Has anyone attempted to build an Apple 1 work-alike?

Postby lizardb0y on Sun Oct 21, 2012 2:02 pm

I haven't build an Apple 1 work-alike, but I did build a Briel Altair 8800micro, which is an Altair 8800 work-alike. Vince Briel also sells his Replica-1 Apple 1 and Micro-KIM MOS KIM kits which are modern designs based on the originals. These are not clones or replicas - they use modern components and have many enhancements such as more RAM, PS/2 keyboard port and ATX PSU connector on the Replica-1.

My experience with Vince's kits having built two of them so far (The 8800micro and the 88-DSK RAM expansion) is that his kits are well built and designed to be easily built by people of any skill level. The instructions provided were clear and easy, though the kits are so well designed that the experienced builder will probably not need the instructions at all.

At $149 USD for the Replica-1 TE (3rd Edition) full kit I'm tempted to buy one just for the thrill of building it even though I have no particular interest in the Apple 1 itself.
lizardb0y / Andrew
Just another 8-bit hustler

blog: http://www.vintage8bit.com
twitter: @vintage8bit
google+: http://gplus.to/lizardb0y
trademe: andrew9 - over 500 positive trades.
lizardb0y
 
Posts: 549
Joined: Mon Oct 06, 2008 8:50 am
Location: Wellington

Re: Has anyone attempted to build an Apple 1 work-alike?

Postby TRS80 on Sun Oct 21, 2012 2:33 pm

I looked at the Briel kit as well. After scratch building a single board Z80 with point to point wiring, I guess it is a trade off between up front cash and build/debugging time.

I am doing an SBC6120 (http://www.sparetimegizmos.com/Hardware/SBC6120-2.htm) at the moment (a DEC PDP8 work-alike) and certainly appreciate the PCB even though it is not a particularly complex circuit.
Wanted: S-100 Bus components - please PM me if you have any. They don't even need to work!

SBC6120 / PDP11 + VAX / TRS-80 / Kaypro / Northstar / Home Brew Z80 / BBC / Amstrad / Commodore
http://www.quicktrip.co.nz/jaqblog
TRS80
 
Posts: 76
Joined: Wed Aug 13, 2008 6:43 pm
Location: Auckland

Re: Has anyone attempted to build an Apple 1 work-alike?

Postby tezza on Sun Oct 21, 2012 3:33 pm

I'm sure they would be fun to build. The Altair replica that Andrew (lizardboy) built is the most interesting to me and might be something for the future.
Tez (Terry Stewart) (Administrator)
Collection: https://www.classic-computers.org.nz/co ... /index.htm
Projects and Articles: https://www.classic-computers.org.nz/blog/index.htm
Twitter: @classiccomputNZ | YouTube: Terry Stewart
Trade Me: tezza5
tezza
Site Admin
 
Posts: 2382
Joined: Thu Jan 01, 1970 12:00 pm
Location: Palmerston North, New Zealand


Return to General

Who is online

Users browsing this forum: No registered users and 31 guests

cron