Make a motherboard battery

Seek advice, give advice or tell others about your repair and restoration projects

Make a motherboard battery

Postby mrad01 on Thu Jan 09, 2014 9:54 am

I upgraded my Color Classic to a LC575 motherboard, I noticed after the upgrade that it didn't keep time or memory settings - flat motherboard battery. Usually I would just take it off and run without - but I actually wanted to use this machine.

The Mac LC575 has a weird battery - 4.5v. I couldn't easily find one around. So I made one. This might help someone out there who needs a odd voltage battery for their machine.

Here is the stock battery in place:

Image

It is held in with velcro - nice work Apple!

So most camera batteries are 3v or 3.6v or 6v - nothing 4.5v. But if you open up a 9v battery (not all - only the more expensive ones), you should see some 1.5v AAAA batteries which you can use. They are already wired together.

Image

Split off 3 to give you 4.5v

Image

Solder the wires on (use a meter to get the +/- right), bundle them up with tape, stick on the velcro

Image

and you are done - here it is in place and it works perfectly. Of course, your mileage may vary - but it is a way to get weird batteries made!

Image
mrad01
 
Posts: 289
Joined: Sun Sep 16, 2012 6:13 pm

Re: Make a motherboard battery

Postby tezza on Thu Jan 09, 2014 9:57 am

Good one. Where there is a will, there is a way!
Tez (Terry Stewart) (Administrator)
Collection: http://www.classic-computers.org.nz/col ... /index.htm
Projects and Articles: http://www.classic-computers.org.nz/blog/index.htm
Twitter: @classiccomputNZ | YouTube: Terry Stewart
Trade Me: tezza5
tezza
Site Admin
 
Posts: 2291
Joined: Thu Jan 01, 1970 12:00 pm
Location: Palmerston North, New Zealand

Re: Make a motherboard battery

Postby mehimu on Thu Aug 28, 2014 1:24 pm

Nice idea. thanks
mehimu
 
Posts: 19
Joined: Mon Aug 04, 2014 2:40 am


Return to Repair and Restoration

Who is online

Users browsing this forum: No registered users and 1 guest