Spectravideo svi-808 pc

Seek advice, give advice or tell others about your repair and restoration projects

Re: Spectravideo svi-808 pc

Postby LS120 on Tue Jan 25, 2022 4:40 pm

so yes it is what i was hoping it was not..... hmmmm looks ok at first glance.. lets remove the rubber and check it out...
Attachments
IMG_20220125_151943_033.jpg
IMG_20220125_151943_033.jpg (268.76 KiB) Viewed 1786 times
IMG_20220125_151932_656.jpg
IMG_20220125_151932_656.jpg (235.47 KiB) Viewed 1786 times
IMG_20220125_150822_566.jpg
IMG_20220125_150822_566.jpg (227.17 KiB) Viewed 1786 times
LS120
 
Posts: 445
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Spectravideo svi-808 pc

Postby LS120 on Tue Jan 25, 2022 4:42 pm

hmmm a bit of a clean and maybe all good...
Attachments
IMG_20220125_151846_462.jpg
IMG_20220125_151846_462.jpg (304.33 KiB) Viewed 1786 times
IMG_20220125_152144_477.jpg
IMG_20220125_152144_477.jpg (165.37 KiB) Viewed 1786 times
LS120
 
Posts: 445
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Spectravideo svi-808 pc

Postby LS120 on Tue Jan 25, 2022 4:44 pm

ohhhh no don't tell me.... yep some ones had a go on here.. maybe a board remake....
Attachments
IMG_20220125_152109_731.jpg
IMG_20220125_152109_731.jpg (225.71 KiB) Viewed 1786 times
LS120
 
Posts: 445
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Spectravideo svi-808 pc

Postby LS120 on Tue Jan 25, 2022 4:47 pm

oh well its all in a box now till i make up my mind....... at least i have the parts that i can read...
Attachments
IMG_20220125_152157_287.jpg
IMG_20220125_152157_287.jpg (200.65 KiB) Viewed 1786 times
IMG_20220125_151904_454.jpg
IMG_20220125_151904_454.jpg (189.46 KiB) Viewed 1786 times
IMG_20220125_151858_712.jpg
IMG_20220125_151858_712.jpg (140.48 KiB) Viewed 1786 times
LS120
 
Posts: 445
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Spectravideo svi-808 pc

Postby LS120 on Mon Feb 14, 2022 9:21 am

ok so some update info for you guys/gals... i have the first re-make of the dc-dc power boards coming for the 808 systems.. thanks to the people whom looked over the board's i re-designed.. will be a few weeks i think.. before they get here.. will keep you posted.. also some one in the group has made a cad of the key stalk plunger to be 3d printed but on several try's i think they need to be resin printed as the fdm is not fine enough..

keep safe all..
LS120
 
Posts: 445
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Previous

Return to Repair and Restoration

Who is online

Users browsing this forum: No registered users and 4 guests

cron