Omega MSX2 BUILD

Seek advice, give advice or tell others about your repair and restoration projects

Re: Omega MSX2 BUILD

Postby LS120 on Thu Jan 13, 2022 4:40 pm

hi ray.. yes i have it all working now.. i made up a new main board as i think there were some faulty passives on the 1st board as i have replaced every ic on it and still wont boot proper..

so all good now.. i must update this blog ...
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Omega MSX2 BUILD

Postby LS120 on Sat Jun 18, 2022 3:25 pm

well for those that are following this post.. i have made some add on cards for the Omega msx.. i have the 4mb ram add on cards, F4/mpac units (complete) and some cf/fdd cards as well (waiting for ailera chips) also made a 728/738 style case for it as i needed more room for the addons.
Attachments
oled.jpg
oled.jpg (210.54 KiB) Viewed 80493 times
fdd-board2.jpg
fdd-board2.jpg (123.86 KiB) Viewed 80493 times
04mega.jpg
04mega.jpg (216.1 KiB) Viewed 80493 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Omega MSX2 BUILD

Postby LS120 on Sat Jun 18, 2022 3:27 pm

also made the td600 fdd card before i went to the cf/fdd cards..
Attachments
IMG_20220408_132141_885.jpg
IMG_20220408_132141_885.jpg (84.77 KiB) Viewed 80493 times
IMG_20220408_132137_800.jpg
IMG_20220408_132137_800.jpg (145.27 KiB) Viewed 80493 times
IMG_20220411_205507_468.jpg
IMG_20220411_205507_468.jpg (325.99 KiB) Viewed 80493 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Omega MSX2 BUILD

Postby LS120 on Wed Aug 31, 2022 3:35 pm

Well over the last few nights i have been Making the UPSCALER GBS with Robert Neumann's GBS CONTROL. have found it not to be a beginner project...and using the WiFi capabilities of the ESP8266. now i just need to print the case and test it.. I have used the GBS-8200 at this time although you can use the GBS-8220 & VC9900 as well.. To access all the functions of the «GBS Control» menu, we must access through a PC or a smartphone. or the OLED screen & rotary encoder.
Attachments
back.jpg
back.jpg (105.99 KiB) Viewed 80130 times
front.jpg
front.jpg (91.6 KiB) Viewed 80130 times
top.jpg
top.jpg (216.41 KiB) Viewed 80130 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Omega MSX2 BUILD

Postby LS120 on Wed Aug 31, 2022 3:37 pm

build so far, just case to print
Attachments
DSCN0167.JPG
DSCN0167.JPG (360.29 KiB) Viewed 80130 times
DSCN0166.JPG
DSCN0166.JPG (378.51 KiB) Viewed 80130 times
DSCN0165.JPG
DSCN0165.JPG (309.6 KiB) Viewed 80130 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Previous

Return to Repair and Restoration

Who is online

Users browsing this forum: No registered users and 7 guests

cron