(Solved) Commodore 1901 failed after 2 hours
Posted: Fri Jun 06, 2014 9:43 pmMy 1901 has failed after two hours use (sounds very familiar to me) does anyone recognize these symptoms please help if you can:
when I turn it on I can hear the crackling of static electricity on the screen as if the LOPT is working,
but there is no power-on LED lighting up ? strange ?
I have already replaced CP01 as this blew on initial power up.
(Solved was dodgy on/off switch)
when I turn it on I can hear the crackling of static electricity on the screen as if the LOPT is working,
but there is no power-on LED lighting up ? strange ?
I have already replaced CP01 as this blew on initial power up.
(Solved was dodgy on/off switch)