Hi I Brought from
http://www.microbeetechnology.com.au/ VGA Video Converter kit. Some soldering is need. It let you use any PC monitor on any Amiga module
Designed to enable the use of VGA monitors with older computers, the Microbee VGA video converter allows for analogue or digital inputs
The digital mode converts true CGA digital input (RGB + Intensity) and provides the proper CGA color map. This is the mode that is used by the Microbee Premium, Premium Plus & 256TC models, along with regular IBM PC’s (CGA) and numerous other computers. Also included is a jumper ‘C128FIX’ to adapt the normal CGA color set to match the Commodore 128’s 80 column mode color set (dark yellow of the CGA set is brown in the C128’s color set).
The analogue mode allows for use with other computers that have true analogue outputs, such as the Commodore Amiga (the converter has been tested with the Amiga & works brilliantly!) Normally it works with TTL level positive HSYNC & VSYNC as the timing signals. It also has options to set the sync polarity for other video systems that differ from positive sync (15Khz) via jumpers. It can also work with a composite sync signal.
For An Amiga You Need The Full Kit $89Au & Amiga to Converter Cable $11.50AU + Postage
Hope That Helps
Hugh