Switch to full style

Kaypro 10

Seek advice, give advice or tell others about your repair and restoration projects

Re: Kaypro 10

by LS120 » Mon Jul 08, 2019 5:55 pm

i'm not starting it up till i recap and flow the plugs
Attachments
kp-10-3-c.jpg
kp-10-3-c.jpg (155.4 KiB) Viewed 47729 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Kaypro 10

by LS120 » Mon Jul 08, 2019 5:57 pm

as can be seen the bigger rom has a jumper installed to Z80
Attachments
kp-10-3-f.jpg
kp-10-3-f.jpg (135.77 KiB) Viewed 47729 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Kaypro 10

by LS120 » Mon Jul 08, 2019 5:58 pm

so anyone looking for a kaypro-10??
Attachments
kp-10-3-e.jpg
kp-10-3-e.jpg (204.66 KiB) Viewed 47729 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Kaypro 10

by LS120 » Mon Jul 08, 2019 5:59 pm

a clean-ish machine.
Attachments
kp-10-3-d.jpg
kp-10-3-d.jpg (208.95 KiB) Viewed 47729 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Kaypro 10

by tezza » Tue Jul 09, 2019 1:44 pm

Another day, another Kaypro :D

Great reading about your adventures with them.
Tez (Terry Stewart) (Administrator)
Collection: https://www.classic-computers.org.nz/co ... /index.htm
Projects and Articles: https://www.classic-computers.org.nz/blog/index.htm
Twitter: @classiccomputNZ | YouTube: Terry Stewart
Trade Me: tezza5
tezza
Site Admin
 
Posts: 2382
Joined: Thu Jan 01, 1970 12:00 pm
Location: Palmerston North, New Zealand

Re: Kaypro 10

by LS120 » Tue Jul 09, 2019 3:15 pm

yes.. just ordered some more 2200uf 16v as have used over 20 so far lo (bloody PSU's)l... and i'm 4 short to do the psu. the advent looks like the clock board as well with the battery. i have seen text about them but never a image of one..
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Kaypro 10

by LS120 » Tue Jul 09, 2019 7:04 pm

awesome it arrived today.. my old de-solder died.. and i miss having one. and all for $125 nz
Attachments
de-solder.jpg
de-solder.jpg (122.37 KiB) Viewed 47726 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Kaypro 10

by LS120 » Thu Jul 11, 2019 3:13 pm

mail call from the USA today.. from the person i got the churtons kaypro book copied for as a thank you.. a kaypro key board
Attachments
kb-1.jpg
kb-1.jpg (156.57 KiB) Viewed 47724 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Kaypro 10

by LS120 » Sun Jul 28, 2019 7:21 pm

another surprise turned up last week.. also the de-solder units have a glass tube as i found out when cleaning it out and dropped it on the floor.. GLASS really....... not Pyrex or acrylic but normal glass tube... so after looking for something to replace it and the cost of the acrylic tube i found it we the right size inside but too big outside.. so decided to see what i could get on TM and then i found it... 21mm out side and 19mm inside and 200mm long.. enough for 3 tubes.. and only $5 ... thats not bad.. but wait, what thats for 3 x tubes... it seems they are used for display pens. so i now have a load of spare tubes now... and its working good.
Attachments
kaypro-1.jpg
kaypro-1.jpg (107.38 KiB) Viewed 47647 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Kaypro 10

by LS120 » Sun Jul 28, 2019 7:23 pm

lots of kaypro books
Attachments
kaypro-2.jpg
kaypro-2.jpg (132.36 KiB) Viewed 47647 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Re: Kaypro 10

by LS120 » Sun Jul 28, 2019 7:24 pm

and a few gems.. 8" head cleaning disk...
Attachments
kaypro-3.jpg
kaypro-3.jpg (134.12 KiB) Viewed 47647 times
LS120
 
Posts: 499
Joined: Fri Jul 22, 2016 9:19 pm
Location: Wellington

Previous

Who is online

Users browsing this forum: No registered users and 44 guests