Thanks for the monitors
I was able to make one good monitor from the two, here it is powered up
(Picture shows my C64 running Dolphin DOS ,it can load 200 blocks in an incredible 5 seconds)
That monitor in the image is the one that had the power cable cut off and the Video port was filled in with glue
I used the PSU (with cable still attached) from the dead one, and dug the glue out, I saved the socket from the dead
one and I will solder that in place later as the port is still a little of a tight fit, but almost there.
The last owner had gone to some lengths to make sure no one ever powered it up again
its received a second chance....