by LS120 on Tue May 14, 2019 6:43 pm
ok so after a week of other work that pays bills and not.. i had some more time to work on the PSU's on the K10's. after a recap of both i re-assembled the 10/83 with the handyman add on and ....... tadaaaaaaaaaaaaa Nothing at all..... what the..... so swapped the other one in and taaaadaaaaaaaa nothing... whats going on here???? so after checking and re-checking couldn't see anything. hmmm lots of head scratching and re-flowing later they both were still dead.. no 12v or 5v but the ac fan works... so must be the psu... so thinking i remembered the kp2 still works and has the same psu in it.. so remove the psu and thats when i saw it.. the 250v caps 1 was miss labled and is backwards.. so de-soldered the 1 cap and re-soldered and bingo all was go again.. looking back on it at the time i replaced them i did question if it was the right way round but well they did mark it that way round.. i was just luck i had one working to check with..
- Attachments
-
![k10-menu3.jpg](./download/file.php?id=239&sid=78eb40335610d90cf52bc7a82fe06cb0)
- k10-menu3.jpg (207.83 KiB) Viewed 65363 times