by LS120 on Wed Jul 03, 2019 4:21 pm
or the 286 for that matter.. i plugged up the psu and powered on... wow it booted.. quick get the phone to take a pick of the boot screen as there is nothing on the board to ID the maker.. i mean nothing.. and i'm not the only one with one of these.. then come back in kitchen to a plumb of smoke.. shit... turn it off.. took out the psu and an electrolytic cap went.. and i don't have any 22uf at 250v.. so it will wait for them to come in.. i did see it's a T.M.C in bios but all i have seen are not mine.. the CPU and ram are in the wrong places. i have worked out the speaker connector.
- Attachments
-
![286-10-f3.jpg](./download/file.php?id=304&sid=63b040a0a22e61bc183f850ae1b32a4d)
- 286-10-f3.jpg (259.41 KiB) Viewed 52683 times